TESLONG NTS500 SCOPE MOUNT & CONVERSION PART FOR nts700
VIEW OF THE MOUNTING BRACKET WITHOUT THE SCOPE FASTENED IN PLACE
This rubber coated magnetic scope mounting plate is specifically made to fit the Teslong NTS500 scope. The scope can be mounted to the bracket in seconds to give the user options for mounting the scope in any position. It features two specially machined Delrin mounting blocks so it will not damage the Teslong scope in any way. The magnetic base is connected to the red mounting plate with a rotating ball connection that enables the plate to swivel to almost any position.
THE SCOPE CAN BE MOUNTED TO ANY SURFACE OF THE SAFE YOU WANT
The scope has been fastened to the mounting plate and is showing an example of it attached to the front of the safe. In this position the screen can swivel up and down for the best possible view of the screen.
SCOPE IS MOUNTED TO THE RIGHT SIDE OF THE SAFE
COMPLETE VERSATILITY FOR MOUNTING IN ANY POSITION, TOP MOUNT SHOWN
By simply rotating the red mounting plate the scope can now be mounted on right side of safe, the screen can swivel left and right for the best possible view,.
COMPLETE VERSATILITY FOR MOUNTING IN ANY POSITION, TOP MOUNT SHOWN
COMPLETE VERSATILITY FOR MOUNTING IN ANY POSITION, TOP MOUNT SHOWN
Scope is mounted to the top of the safe and in this position the screen can swivel up and down for the best view of the screen
SCOPE IS MOUNTED TO THE LEFT SIDE OF THE SAFE BY SIMPLY ROTATING THE MOUNTING PLATE
Scope mounted on the left side of the safe where it can pivot left & right for the best view possible.
SIDE VIEW & VIDEO LINK BELOW
The black rubber coated base conceals two very powerful rare earth magnets so it will never scratch the safe when attached. One side of the rubber coated base is marked "top" to identify the opposite side of the magnetic base. Since the magnets are covered by the rubber, metal chips can be easily removed.
Click the link to watch the YouTube demonstration video
Lockmasters NTS700 scope mounted on the left side of safe
This is the new Lockmasters NTS700 scope mounted to the original Lock Defeat Technology NTS500 scope mount by simply changing the bottom mounting bracket
Front mounting scenario for NTS700
This new Lockmasters NTS700 is much larger and heavier than the original NTS500 scope. Due to the extremely powerful rare earth magnets used in the original mount, it holds securely onto any safe even with the added weight. Same as the original mount, it can be installed on the safe on the front, top, left side or right side for optimal viewing of the screen.
Lock Defeat Technology NTS700 conversion bracket to fit the original NTS500 scope mounting system
Lock Defeat Technology NTS700 conversion bracket to fit the original NTS500 scope mounting system
Conversion bracket with the new screws and allen wrench. This photo shows all angles of this new part. Only one bracket is needed. Stainless steel button head screws are installed from the back of the red mounting plate to convert for use with the NTS700 scope.
Scope mount can be ordered for either the NTS500 or the NTS700 scope. Both bottom brackets can also be ordered to fit both scopes if desired.